|>_____________________ A E R O Z A P _______________________<| | | | Presents | | | | A New and Improved Phreaking Method... | | | | | | _A E_R_O_B_O_X_ | |>___________________________________________________________<|
Disclaimer: All this Information is for educational and informational purposes only. I claim no resposibility if this information is misused.
Dedications go out to: MonDo, Alexandr, AiRaVe, HyperHell n' of course TeAm HysteriA.
A E R O B O X _____________ All right, let's get down to business, this phreaking method can be used to call free for both local and international calls. It might not be usable in some payphones, but should work on most. Well, it certaintly works on the Uniphones. B4 I start, I would suggest you to take a walk down to a payphone and observe the payphone carefully to then decide what appliances you'll need to use Aerobox on it.
Stuff will you need:
1) A Knife (small one) if the telephone lines connecting to the payphone is enclosed by the PVC pipe.
A Screw driver (If the telephone lines go through the bottom of the ground, and goes through an enclosed area normally metal which is screwed up with either 2 or 4 screws.) Normally 2 Allan Key screws are used.
2) A phone wires changer (or sometimes known as phone socket). Which is something like this:
|| + = + shaped screws || <-Phone Lines _____||_____ | / \ <-Phone Lines spliting up and connecting to + | +/ \+ | (Now you should be able to see the copper wires | ( ) | connecting to the + shaped screws. | + ( ) +| | ( ( ) ) | | ( ) | ) = copper wires enclosed by rubber of |____||||||__| different colors on top. ||| ||| ||| <-Phone wires connecting to telephone ||| (colors normally either Cream, Black or White) Telephone
NOTE: SOME PHONES LINES MAY HAVE FOUR WIRES COMMING OUT CONNECTING TO ALL 4 + SHAPED SCREWS WHILE SOME HAVE ONLY 2.
3)An + shaped screw driver for releasing and tightening the + shaped screw on the phone socket.
4)A pair or scissors (for cutting wires).
5)A wire cutter (to cut only the rubber off the wire leaving the copper wire behind). Alternatively, you can just make use of the scissors to cut the rubber of the wires.
6)And of course, A TELEPHONE (And ordinary Telephone will do).
After preparing all that, the next part is pretty simple and straight foward.
1)Unscrew the the metal box that encloses the phone lines. or cut the PVC pipe that encloses the phone lines.
2)You will find several wires. Here's the combination:
a) Several wires and two black wires which in this case, the black wires are joined together.
If you have this combination, do the following: 1)separate the two black wires using the scissors. 2)Use the wire cutter or the scissors to take a few centimeters of rubber off the copper wire.(on both black wires) 3)Snap off all the other wires. 4)Unscrew the + screws on the phone socket. 5)Connect the copper part of the two black wires to the two + screws on the phone socket (and screw the + shaped screws back) and from the other side of the phone socket to your phone. Like this:
|| + = + shaped screws || <-Black Wires _____||_____ | / \ <-Black Wires spliting up and copper part of the | +/ \+ | black wires connecting to the to + screws. | | | + + | | | | | |____||||||__| ||| ||| ||| <-Phone wires connecting to telephone ||| (colors normally either Cream, Black or White) Telephone
THEN YOU DONE! YOU ARE NOW ABLE TO CALL ANYWHERE FOR FREE!
Well, you are now able to call free, well, I have better news for you. If you connect your phone wires connecting to your phone to your modem or PCMCIA modem, you will be able to dialup and log onto the INTERNET or BBSes or Maybe even do some Hackin! Well, that's not all, your portable computer might run out of battery if you use it for a long time..but don't worry, I have a way to overcome this problem. If the payphone you phreaked had a light bulb to lighten the phone booth during the night or has some sort of electrical appliance connected to it, THEN BINGO! You will find that there will be another wire which is normally grey beside the black wire or around there. Cut the grey wire and you'll find 3 or 4 wires inside it. Then as usual, take a few centimeters of the rubber part off so you can now see a few CM of the copper wire.(do it for all 3 or 4 wires). Then, connect the copper part of the wires (2 or 3) to any of the two or three metal heads of your portable charger plug, and bingo! its all done.... Call for free, log into Internet for free, and charge your portable computer's battery for free too!
A E R O Z A P
"Member Of Team HysteriA"
"Security Gives Way to Conspiracy..."
IF YOU EXPERIENCE ANY DIFFICULTY IN UNDERSTANDING OR YOU NEED HELP, PLEASE DON'T HESITATE TO CONTACT ME AT:
http://www.geocities.com/SiliconValley/8029 (A HPWCV site that is updated daily!)lotsa Hack,Phreaking,Virii,Carding,Warez. (You can mail me from my homepage)
Or contact me directly by mail at: